ISO/IEC 17025 Accredited · Trusted by Engineers Worldwide · Serving 11 Industries
+1 530-268-1860 contact@microprecision.com
Geokon, Fluke, PTL Limited & Advance Witness — Calibrated & Ready to Ship
Buy or rent precision force measurement equipment from Micro Precision. Every product ships with ISO/IEC 17025 calibration included.
6 calibrated force measurement equipment from PTL Limited to Geokon — click a category to expand.
What each instrument type does, when you need it, and what specs to check before you buy.
Torque analyzers measure rotational force applied to fasteners, fittings, and drive mechanisms — essential for assembly QC and torque wrench calibration. Use one when you need to verify torque values against a specification or calibrate hand tools on a production line. The Advance Witness AWS-3075 covers 75–750 in-lbs with ±0.5% accuracy and a 3/8" square drive, making it a go-to for mechanical assembly and calibration labs. Key spec to check: ensure the measurement range covers both your minimum and maximum torque values, with at least 20% headroom above the peak load.
Load cells convert compressive or tensile force into an electrical signal. Strain gauge types output a millivolt signal proportional to load — ideal for industrial weighing and process control. Vibrating wire types output a frequency signal for long-term geotechnical monitoring where signal drift over time would otherwise be a concern. The Geokon 3000-100-1 handles 100–10,000 kN with ±0.5% accuracy for structural and geotechnical applications; the PTL PT7000 is IP68-rated in 316L stainless steel for hygienic tank and silo weighing up to 50,000 kg. Key spec to check: capacity, IP rating, and output type against your readout or indicator.
Readouts and indicators display the electrical signal from a load cell as a human-readable force value. Field-portable readouts like the Geokon GK-502 add data logging and USB output for site-based structural monitoring — capturing time-stamped load records without a PC. Panel-mount indicators like the PTL PT200MI suit production environments with a high-resolution LED display, 4–20mA output for PLC integration, and RS-232 for data acquisition systems. Key spec to check: confirm the indicator accepts your load cell's output type — strain gauge (mV/V), vibrating wire, or 4–20mA — before pairing.
Pressure modules plug into a calibrator mainframe to extend it with pressure and vacuum measurement capability — avoiding the cost of a dedicated pressure gauge for occasional field work. The Fluke PV350 covers −14.7 to 500 psi and is compatible with all Fluke 700 Series calibrators, enabling both positive pressure and vacuum measurements from a single module. It is designed for rugged field use where a benchtop pressure controller is impractical. Key spec to check: verify psi range covers your test pressures and confirm compatibility with your existing Fluke 700 Series mainframe model before ordering.
Every force measurement instrument sold by Micro Precision is tested and verified operational before shipment. ISO/IEC 17025 accredited calibration is available for all instruments, providing NIST-traceable documentation required by aerospace, defense, manufacturing, and regulated laboratory environments. Our calibration certificates meet MIL-STD-45662 and ISO 9001 quality requirements — ensuring every torque analyzer, load cell, and pressure module in your measurement chain performs to specification on day one.
From assembly lines to geotechnical field sites — the industries and tasks that depend on accurate force, torque, load, and pressure measurement.
Torque verification is a critical step in any bolted assembly — from automotive components to medical devices. The Advance Witness AWS-3075 is used on production lines to verify that fasteners meet specification torque values and to calibrate torque wrenches in-house, reducing reliance on third-party calibration services and tightening first-pass yield rates.
Bridges, retaining walls, tunnels, and foundation piles require continuous load monitoring over months or years. The Geokon 3000-100-1 vibrating wire load cell is embedded in concrete or installed on structural members to track load changes over time, while the Geokon GK-502 readout captures and logs that data in the field without a PC.
Process industries — food, chemical, pharmaceutical — use load cells beneath storage vessels to measure fill levels by weight rather than volume, which is more accurate when bulk density varies. The PTL PT7000 handles up to 50,000 kg in IP68-rated 316L stainless steel, while the PTL PT200MI indicator feeds live weight data to a PLC or SCADA system via 4–20mA.
Calibration technicians performing loop checks and pressure transmitter calibration in the field need a portable pressure source and measurement reference without carrying a benchtop setup. The Fluke PV350 clips into any Fluke 700 Series calibrator to add −14.7 to 500 psi pressure and vacuum measurement on-site — covering HVAC, pneumatic controls, and process instrumentation calibration in a single module.
Structural load testing on aircraft components, landing gear systems, and munitions handling equipment requires force measurement instruments backed by NIST-traceable calibration documentation that satisfies MIL-STD-45662 and AS9100 audit requirements. Every instrument sold by Micro Precision is available with an ISO/IEC 17025 accredited calibration certificate, providing the documentation trail required for aerospace and defense program compliance.
University labs, product development teams, and materials testing facilities use load cells and readouts to characterize tensile strength, compression behavior, and fatigue limits on new materials and prototypes. Readouts with USB data output like the Geokon GK-502 feed raw force data directly into analysis software for curve fitting and reporting — no manual transcription required.
